ESP8266 NodeMCU WiFi Programming Development Kit 30-Pin With CH9102

This low-cost, smart and WiFi enabled board is a great starting point for those who are new to developing network-enabled projects. Featuring the powerful ESP8266 chip, it has significantly more processing power than standard Arduino microcontrollers and is fully compatible with the Arduino Integrated Development Environment (IDE) software, which makes it easy to use and uploading sketches to the board simple. The CH9102X version is much smaller than the CH340G version of the NodeMCU and, unlike the CP2102 version, it is more stable and does not need the FLASH Button to be held down during sketch uploading. It is also fully USB ‘Plug and Play’ Ready for Windows 10 .

The header pins come pre-soldered onto this board so that it is completely ready to use.

Features

• Standards Certification: FCC / CE / TELEC
• Wireless standards: 802.11 b / g / n
• Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)
• Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM
• Working Current: Average: 80mA
• Operating temperature: -40 ° ~ 125 °
• Wi-Fi Direct (P2P), soft-AP
• Integrated TCP/IP protocol stack
• Integrated TR switch, balun, LNA, power amplifier and matching network
• Integrated PLLs, regulators, DCXO and power management units
• +19.5dBm output power in 802.11b mode
• Power down leakage current of <10µA
• Integrated low power 32-bit CPU could be used as application processor
• SDIO 1.1 / 2.0, SPI, UART
• STBC, 1×1 MIMO, 2×1 MIMO
• A-MPDU & A-MSDU aggregation & 0.4ms guard interval
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW (DTIM3)
• Power supply:
  • microUSB port (default)
  • 3.3 V leads and GND
• Dimensions: 49mm x25.5mm